{"title":"Best Sellers","description":"\u003cp\u003eOur most popular prewired guitar wiring harnesses, hand-built and tested by Gary Standerfer. Free USA shipping.\u003c\/p\u003e","products":[{"product_id":"es-335-prewired-wiring-harness","title":"ES-335 Wiring Harness – Prewired, Orange Drop or PIO","description":"\u003ch2 id=\"main-description\"\u003ePrewired Wiring Harness for the Gibson \u0026amp; Epiphone ES-335\u003c\/h2\u003e\n\u003cp\u003eThe ES-335 is semi-hollow, not fully hollow — a solid maple block runs down the center of the body, so your pickups mount to something solid instead of hanging off a floating top. The control cavity itself is still an open, routed pocket, though, so there's no rear access panel either way: every pot, the switch, and the jack have to go in through the f-hole, same as on a fully hollow body. This harness is built as a single complete unit and tested on our workbench first, so what arrives at your door is a single pre-spaced assembly you can feed in and mount — not a bag of parts to solder blind. Two volume controls, two tone controls, a 3-way pickup selector switch, wiring diagram, and installation instructions included.\u003c\/p\u003e\n\u003cp\u003eEvery ES-335 harness we build uses premium components selected for reliability and tonal performance, wired 50s-style so that rolling back the volume knob keeps your top end intact rather than getting dull, with a tone control that stays smooth across its full range. \u003c\/p\u003e\n\u003ch2\u003eChoose Your Tone Caps\u003c\/h2\u003e\n\u003ch3\u003ePaper-in-Oil (PIO) or Orange Drop\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCentralab\u003c\/strong\u003e \u003cstrong\u003ePaper-in-Oil \u003c\/strong\u003e(.033uF bridge, .015uF neck) is our Premium build — cleaner, warmer tone for jazz and blues playing, with a bit of bluesy grit when you dig in and improved sustain. Both are built for humbuckers. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOrange Drop\u003c\/strong\u003e (.022uF bridge, .022uF neck) is our Classic-series cap — modern-style tone with full dynamic range and a bright, distinct sound, a straightforward step up from the stock electronics most ES-335s ship with. \u003cbr\u003e\u003cbr\u003eSince both cap options wire in exactly the same way, swapping later is a cap change, not a rewire.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour Bourns Pro Audio 500K potentiometers (coarse-spline, short shaft)\u003c\/li\u003e\n\u003cli\u003eTone capacitors — your choice: Orange Drop (.022uF bridge \/ .022uF neck) or Centralab Paper-in-Oil \/ PIO (.033uF bridge \/ .015uF neck)\u003c\/li\u003e\n\u003cli\u003eSwitchcraft or Centralab 3-way toggle switch, prewired with a black tip\u003c\/li\u003e\n\u003cli\u003eSwitchcraft 1\/4-inch output jack\u003c\/li\u003e\n\u003cli\u003eVintage-style braided Gavitt 22 AWG push-back wire\u003c\/li\u003e\n\u003cli\u003eFully prewired harness assembly board, drilled to specs and tested before it ships\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Gibson or Epiphone ES-335 and Casino\u003c\/li\u003e\n\u003cli\u003eSheraton models may have a smaller f-hole — if yours measures too small (see f-hole minimum width below), \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003econtact us\u003c\/a\u003e, we have an option with a smaller potentiometer.\u003c\/li\u003e\n\u003cli\u003eKnobs require an 18-tooth coarse-spline fit (replacement knobs sold separately)\u003c\/li\u003e\n\u003cli\u003eEach pot mounts through a 3\/8-inch control-cavity hole. Offshore-made units are often drilled for 5\/16-inch pots and will need to be reamed out to 3\/8 inch\u003c\/li\u003e\n\u003cli\u003eJack wire run is long enough to reach the edge of the body — 9\" total, which includes 3\" of extra allowance built in for guitars with the jack mounted at the end of the body\u003c\/li\u003e\n\u003cli\u003eNot sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComponent spacing, for reference against your own guitar's control cavity:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMeasurement\u003c\/th\u003e\n\u003cth\u003eDistance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume to volume\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTone to tone\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume to tone\u003c\/td\u003e\n\u003ctd\u003e2.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJack to switch (wire run)\u003c\/td\u003e\n\u003ctd\u003e6\" (plus the 3\" extra allowance noted above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch to neck volume\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-hole minimum width (at widest point, for harness feed-through)\u003c\/td\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eShipping \u0026amp; Build Time\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4–6 business days to build before it ships — every harness is custom-built to order, not pulled off a shelf\u003c\/li\u003e\n\u003cli\u003eIn-stock means we have the parts on hand to build yours\u003c\/li\u003e\n\u003cli\u003eShips to your USA front door for free\u003c\/li\u003e\n\u003cli\u003eTested on the bench before it leaves — every harness is 100% guaranteed, and I want you to be 100% satisfied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose PIO versus Orange Drop capacitors?\u003c\/strong\u003e\u003cbr\u003eIt comes down to voicing, not quality —  Centralab PIO leans warmer and cleaner for jazz and blues, with more sustain and grit when pushed. Orange Drop gives you a brighter, more modern sound with full dynamic range;  Both are built for humbuckers and wire in identically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the pickup selector included with this wiring harness?\u003c\/strong\u003e\u003cbr\u003eYes — a Switchcraft or Centralab 3-way toggle, prewired with a black tip, comes on every harness.  The gold-plated switch is an option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size knobs do I need?\u003c\/strong\u003e\u003cbr\u003eCoarse-spline, 18-tooth — we sell replacement knobs in that fit if yours don't match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work on my Casino?\u003c\/strong\u003e\u003cbr\u003eYes, this harness fits the Gibson\/Epiphone ES-335 and the Casino.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work on my Sheraton?\u003c\/strong\u003e\u003cbr\u003eSheraton owners should first check their f-hole width. The minimum f-hole width, at the widest point, for harness feed-through is 1 1\/8\". Contact us if you're unsure about how to measure. We have an option with a pot that has a smaller base that will fit through smaller f-holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThere's no back panel on my guitar — how does this actually go in?\u003c\/strong\u003e\u003cbr\u003eAs one piece. We build and test the whole harness on our bench first, then it feeds through the f-hole into your control cavity as a single assembly — see the Workbench Note below for the technique.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the turnaround time?\u003c\/strong\u003e\u003cbr\u003e4–6 business days to build, then it ships free to any US address.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 20px; margin-bottom: 20px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/gary.jpg?v=1784479278\" alt=\"Gary Standerfer - Tone Man Guitar\" style=\"width: 100px; height: 100px; border-radius: 50%; object-fit: cover; border: 2px solid #e8e8e8; flex-shrink: 0;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eCheers,\u003cbr\u003eGary Standerfer \/ Tone Man Guitar\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- START WORKBENCH NOTE BLOCK --\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"margin: 0 0 8px 0; font-weight: bold;\"\u003eWorkbench Note:\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eThe ES-335's center block runs through the middle of the body, but it doesn't actually crowd the control cavity — that's a routed, open pocket regardless of the block. The f-hole opening is the real constraint, and it's the same one a fully hollow guitar hands you, so patience matters more than the block does. Feed the components through one at a time, in order: whichever one ends up sitting nearest the f-hole goes in first, the jack goes in last, and give the wires a little slack rather than pulling them taut so nothing snags as each piece settles into place. Because this harness ships pre-built and pre-spaced as one assembly, you're guiding a finished unit into position, not routing loose parts and hoping they land right. Learn more about f-hole installation layouts by reading our \u003ca href=\"https:\/\/tonemanguitar.com\/blogs\/news\/es335-es339-hollowbody-guitar-wiring-harness-installation-guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eES-335 wiring harness installation guide\u003c\/a\u003e. Not sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- END WORKBENCH NOTE BLOCK --\u003e","brand":"Tone Man Guitar","offers":[{"title":"Premium Harness with Paper-in-Oil (PIO) Caps","offer_id":46967939104966,"sku":null,"price":130.99,"currency_code":"USD","in_stock":true},{"title":"Premium Harness w\/ PIO Caps Gold-Plated Switch","offer_id":47138378023110,"sku":null,"price":145.99,"currency_code":"USD","in_stock":true},{"title":"Standard Harness with Orange Drop Caps","offer_id":47138378055878,"sku":null,"price":110.99,"currency_code":"USD","in_stock":true},{"title":"Standard w\/ Orange Drops \u0026 Gold-Plated Switch","offer_id":47138378088646,"sku":null,"price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/ES335_PIO_fixed.jpg?v=1787848659"},{"product_id":"telecaster-wiring-harness","title":"Telecaster Wiring Harness – Prewired","description":"\u003ch2 id=\"main-description\"\u003eTelecaster Wiring Harness, Prewired and Bench-Tested\u003c\/h2\u003e\n\u003cp\u003eThis prewired Telecaster wiring harness is built for the standard Fender Telecaster—one volume control, one tone control, and a 3-way pickup selector switch— and is fully assembled and bench-tested before it ships. Every harness ships with a wiring diagram and installation instructions, and arrives prewired on an assembly board with sleeve adapters included so it drops straight into a standard Telecaster control cavity.\u003c\/p\u003e\n\u003cp\u003eThis Telecaster harness uses 50s-style wiring, meaning the tone cap is wired between the tone and volume pots.  This helps eliminate treble bleed when the volume is turned down and maintains the correct taper of both controls.  Built with vintage-inspired 50s-style wiring and correct-value components throughout, it delivers smoother control feel, improved reliability, and clearer pickup response as soon as you install it. It fits Fender, Player, and American Standard Telecasters with the standard control layout.\u003c\/p\u003e\n\u003ch2\u003eChoose Your Tone Cap\u003c\/h2\u003e\n\u003ch3\u003ePaper-in-Oil (PIO) or Orange Drop\u003c\/h3\u003e\n\u003cp\u003eBoth are proven vintage-style .047uF tone capacitors, available on the same prewired harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaper-in-oil (PIO)\u003c\/strong\u003e caps are the premium choice — prized for a warmer, more gradual roll-off as you turn down the tone knob, the true 50s vintage character Telecaster players chase. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrange Drop\u003c\/strong\u003e caps are the modern standard — a clean, consistent roll-off at a more affordable price. Wire either one into your Telecaster the same way; only the capacitor changes.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 250K Bourns Pro Audio potentiometers (one volume, one tone)\u003c\/li\u003e\n\u003cli\u003eTone capacitor — your choice: Paper-in-Oil \/ PIO (.047uF) or Orange Drop (.047uF)\u003c\/li\u003e\n\u003cli\u003eOak Grigsby 3-way blade switch, prewired (switch tip not included)\u003c\/li\u003e\n\u003cli\u003eSwitchcraft 1\/4-inch output jack\u003c\/li\u003e\n\u003cli\u003eVintage-style Gavitt cloth push-back wire\u003c\/li\u003e\n\u003cli\u003eSleeve adapters (split-shaft to solid-shaft conversion)\u003c\/li\u003e\n\u003cli\u003eFully assembled onto a harness board and tested before it ships\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits the standard Fender Telecaster: 1 volume, 1 tone, 3-way switch, 2 single-coil pickups — including Player Telecaster and American Standard Telecaster models\u003c\/li\u003e\n\u003cli\u003eShips with 250K pots; need 500K instead? Leave a note in your order comments at checkout, and we'll build it that way at no extra charge\u003c\/li\u003e\n\u003cli\u003eNot sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHave a Telecaster with a different control layout?\u003c\/h3\u003e\n\u003cp\u003eThese harnesses are built for the standard 2-control layout above — for other configurations, see:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/tonemanguitar.com\/products\/fender-nashville-telecaster-pio-tone-caps-cloth-wiring-premium-vintage-series\"\u003eNashville Telecaster Wiring Harness\u003c\/a\u003e (3 pickups)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/tonemanguitar.com\/products\/telecaster-wiring-kit-reversed-controls-3-way-switch-047-pio-vintage-tone-cap-bourns-pots-cloth-wiring-premium-vintage-series\"\u003eTelecaster Reversed-Control Wiring Harness\u003c\/a\u003e (volume front, tone middle, switch back)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/tonemanguitar.com\/products\/telecaster-deluxe-prewired-harness-kit-pio-tone-caps-premium-vintage-series\"\u003eTelecaster Deluxe Wiring Harness\u003c\/a\u003e (4-control models)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/tonemanguitar.com\/products\/fender-telecaster-wiring-harness-kit-vintage-paper-in-oil-tone-cap-cloth-wiring-premium-blues-60-series\"\u003eTelecaster Blues 60s Wiring Harness\u003c\/a\u003e (.033uF cap voiced to tame harsh high-end \"ice pick\" frequencies)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping \u0026amp; Build Time\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom-built to order, with a 4–6 business day lead time before it ships\u003c\/li\u003e\n\u003cli\u003eIn-stock means we have the components on hand to build yours — not a pre-built unit sitting on a shelf\u003c\/li\u003e\n\u003cli\u003eFree shipping to U.S. addresses\u003c\/li\u003e\n\u003cli\u003eEasy 30-day return policy — if anything about your harness isn't right, we want to make it right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between PIO and Orange Drop tone caps?\u003c\/strong\u003e\u003cbr\u003eBoth are 0.047uF and wired the same way. Paper-in-oil (PIO) is the premium option, rolling off more gradually for a warmer, vintage-correct character. Orange Drop is the modern-vintage standard with a clean, consistent roll-off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the pickup selector switch?\u003c\/strong\u003e\u003cbr\u003eYes — an Oak Grigsby 3-way blade switch is prewired into every harness (switch tip not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat guitars does this fit?\u003c\/strong\u003e\u003cbr\u003eThe standard Fender Telecaster control layout: 1 volume, 1 tone, 3-way switch, 2 pickups — including Player and American Standard Telecasters. If your Telecaster has 3 pickups (Nashville), a reversed control layout, or 4 controls (Deluxe), see the links above for the harness built for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I get 500K pots instead of 250K?\u003c\/strong\u003e\u003cbr\u003eYes — just note it in your order comments at checkout, and we'll build your harness with 500K pots instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to ship?\u003c\/strong\u003e\u003cbr\u003eEach harness is custom-built to order, with a 4–6 business-day lead time before it ships. Shipping to U.S. addresses is free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's your return policy?\u003c\/strong\u003e\u003cbr\u003eEvery harness is backed by an easy 30-day return policy — if anything isn't right, we want to make it right.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 20px; margin-bottom: 20px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/gary.jpg?v=1784479278\" alt=\"Gary Standerfer - Tone Man Guitar\" style=\"width: 100px; height: 100px; border-radius: 50%; object-fit: cover; border: 2px solid #e8e8e8; flex-shrink: 0;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eCheers,\u003cbr\u003eGary Standerfer \/ Tone Man Guitar\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- START WORKBENCH NOTE BLOCK --\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"margin: 0 0 8px 0; font-weight: bold;\"\u003eWorkbench Note:\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eOn a Telecaster, the harness mounts to the control plate (or pickguard, depending on your model) and drops into the body cavity as one unit. It's a straightforward install but still worth doing carefully. Test-fit the harness against your control plate before final assembly, keep the ground wire connections clean and secure, and lay a soft cloth over the body edge while you work to protect the finish. Not sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- END WORKBENCH NOTE BLOCK --\u003e","brand":"Tone Man Guitar","offers":[{"title":"Premium Paper-in-Oil (PIO) Capacitor","offer_id":46992100753606,"sku":null,"price":91.99,"currency_code":"USD","in_stock":true},{"title":"Standard Orange Drop Capacitor","offer_id":47138377826502,"sku":null,"price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/telecaster-wiring-harness-prewired.jpg?v=1792326467"},{"product_id":"stratocaster-prewired-wiring-harness","title":"Stratocaster Wiring Harness – Prewired, PIO or Orange Drop","description":"\u003ch2 id=\"main-description\"\u003eStratocaster Prewired Wiring Harness (5-Way Switch, .047uF Tone Cap)\u003c\/h2\u003e\n\u003cp\u003eThis prewired wiring harness is built for the standard Fender Stratocaster control layout — three single-coil pickups, one volume, two tone controls, and a 5-way blade switch — fully assembled and tested on our workbench before it ships. Every harness ships with a wiring diagram and installation instructions, and arrives prewired on a drilled assembly board sized to your Stratocaster's control cavity. Each harness is carefully assembled by hand.  I want you to be 100% satisfied.\u003c\/p\u003e\n\u003cp\u003eIf you've been searching for a Stratocaster wiring harness for your standard SSS or HSS Strat, this is the harness.\u003c\/p\u003e\n\u003ch2\u003eChoose Your Tone Cap\u003c\/h2\u003e\n\u003ch3\u003ePaper-in-Oil (PIO) or Orange Drop\u003c\/h3\u003e\n\u003cp\u003eBoth options are wired with a .047uF tone capacitor — the vintage-correct value for a Stratocaster's single-coil pickups — on the same standard-wired harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaper-in-oil (PIO)\u003c\/strong\u003e is our premium recommendation: prized for a warmer, more gradual roll-off as you turn down the tone knob, delivering the true 50s vintage tone Strat players chase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOrange Drop\u003c\/strong\u003e gives a bright, punchy, modern-vintage voicing — the classic Fender-style tone at a more affordable price. \u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBourns Pro Audio potentiometers, 250K (volume, neck tone, middle tone)\u003c\/li\u003e\n\u003cli\u003eTone capacitor — your choice: Paper-in-Oil (.047uF) or Orange Drop (.047uF)\u003c\/li\u003e\n\u003cli\u003eOak Grigsby 5-way blade switch, prewired (switch tip not included)\u003c\/li\u003e\n\u003cli\u003eSwitchcraft 1\/4-inch output jack\u003c\/li\u003e\n\u003cli\u003eVintage-style cloth Gavitt push-back wire\u003c\/li\u003e\n\u003cli\u003eFully assembled onto a drilled harness board and tested before it ships\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTone Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClearer pickup response\u003c\/li\u003e\n\u003cli\u003eSmooth, responsive volume and tone adjustments\u003c\/li\u003e\n\u003cli\u003eAuthentic Stratocaster voicing — vintage 50s warmth with PIO, or classic Fender punch with Orange Drop\u003c\/li\u003e\n\u003cli\u003eReliable, premium-grade components throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits the standard 3-control, 5-way switch Stratocaster: Fender Stratocaster, Player Strat, American Standard Strat, and similar SSS or HSS (three single-coil) models\u003c\/li\u003e\n\u003cli\u003eBuilt for the standard SSS control layout — not intended for HH Stratocaster wiring configurations\u003c\/li\u003e\n\u003cli\u003eLooking for the Eric Johnson dedicated bridge-tone-pot wiring? \u003ca href=\"https:\/\/tonemanguitar.com\/products\/stratocaster-eric-johnson-fender-prewired-upgrade-wiring-kit-pio-tone-cap-premium-ej-series\"\u003eSee the Eric Johnson Signature Harness\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLooking for a vintage-correct .1uF early-60s tone cap? \u003ca href=\"https:\/\/tonemanguitar.com\/products\/strat-wiring-harness-blues-64-kit-vintage-paper-in-oil-tone-cap-cloth-wiring-premium-blues-64-series\"\u003eSee the Blues '64 Harness\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping \u0026amp; Build Time\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom-built to order, with a 4–6 business day lead time before it ships\u003c\/li\u003e\n\u003cli\u003eIn-stock means we have the components on hand to build yours — not a pre-built unit sitting on a shelf\u003c\/li\u003e\n\u003cli\u003eFree shipping to U.S. addresses\u003c\/li\u003e\n\u003cli\u003eIf anything about your harness isn't right, we want to make it right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between Orange Drop and PIO tone caps?\u003c\/strong\u003e\u003cbr\u003eBoth are .047uF on this harness. Orange Drop is the modern-vintage standard with a clean roll-off; paper-in-oil (PIO) rolls off more gradually for a warmer, more vintage-correct 50s character.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the 5-way switch?\u003c\/strong\u003e\u003cbr\u003eYes — an Oak Grigsby 5-way blade switch is prewired into every harness (switch tip not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my HSS or HH Stratocaster?\u003c\/strong\u003e\u003cbr\u003eThis Strat harness is great for the HSS setup.  The 250K pots work with a humbucker in the bridge to give it some extra warmth and thickness. \u003cbr\u003e\u003cbr\u003eThis Stratocaster wiring harness \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e work with the HH pickup configuration, but we have a custom harness for the HH.  \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for a quote on this setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you offer the Eric Johnson wiring or a .1uF vintage cap?\u003c\/strong\u003e\u003cbr\u003eYes — those are built as separate harnesses since they use different wiring or cap specs than this standard version. See our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/stratocaster-eric-johnson-fender-prewired-upgrade-wiring-kit-pio-tone-cap-premium-ej-series\"\u003eEric Johnson Signature Harness\u003c\/a\u003e or our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/strat-wiring-harness-blues-64-kit-vintage-paper-in-oil-tone-cap-cloth-wiring-premium-blues-64-series\"\u003eBlues '64 Harness\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to ship?\u003c\/strong\u003e\u003cbr\u003eEach harness is custom-built to order, with a 4–6 business-day lead time before it ships. Shipping to U.S. addresses is free.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 20px; margin-bottom: 20px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/gary.jpg?v=1784479278\" alt=\"Gary Standerfer - Tone Man Guitar\" style=\"width: 100px; height: 100px; border-radius: 50%; object-fit: cover; border: 2px solid #e8e8e8; flex-shrink: 0;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eCheers,\u003cbr\u003eGary Standerfer \/ Tone Man Guitar\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- START HARNESS NOTE BLOCK --\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"margin: 0 0 8px 0; font-weight: bold;\"\u003eWorkbench Note:\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003eYou probably started thinking about your Stratocaster wiring for one or both of two reasons.  The most common motivator is that you're just not happy with your tone; it just isn't the sound you've heard on your favorite recordings or dreamed of.  Or maybe the controls have gotten noisy, or aren't easy to fine-tune, or aren't reliable. A volume pot has gone scratchy or the 5-way switch crackles between positions.  \u003cbr\u003e\u003cbr\u003eTrying to fix these problems component by component can be frustrating, especially if you lack the experience to solder reliably without damaging any components.  It becomes even harder if the first try doesn't \"fix it\" and you have to go back and try again.  \u003cbr\u003e\u003cbr\u003eThat's why the prewired Strat harness is a great solution - it replaces the whole signal path in one go.  A new complete harness offers just the right pots, switch, jack, and tone cap, built to spec and tested before it ever leaves the bench. It's why so many Fender Strat owners search for a Stratocaster wiring harness instead of troubleshooting a single failed part: in one afternoon, you can swap out the scratchy pots and dull tone for a fresh PIO or Orange Drop tone cap and hardware that's ready to perform for years.  The installation guide we include with every order will show you exactly how to do it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- END HARNESS NOTE BLOCK --\u003e","brand":"Tone Man Guitar","offers":[{"title":"Premium Paper-in-Oil Capacitor","offer_id":46992962912454,"sku":null,"price":91.99,"currency_code":"USD","in_stock":true},{"title":"Standard Orange Drop Capacitor","offer_id":47138377793734,"sku":null,"price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/stratocaster-wiring-harness-prewired.jpg?v=1792330187"},{"product_id":"les-paul-premium-59-series-paper-in-oil-prewired-harness","title":"Les Paul Wiring Harness – Prewired '59 Series, PIO Caps","description":"\u003ch2 id=\"main-description\"\u003eLes Paul Premium 59 Series Prewired Wiring Harness\u003c\/h2\u003e\n\u003cp\u003eThe Premium 59 Series is our paper-in-oil prewired wiring harness for Gibson and Epiphone Les Paul models with the standard two-volume, two-tone, 50s-wiring layout. Each harness is hand-assembled and tested on our bench, then shipped prewired on a drilled assembly board sized to your Les Paul's control cavity, with a wiring diagram and installation instructions included.\u003c\/p\u003e\n\u003cp\u003eWhat sets the 59 Series apart is the tone capacitor: Centralab paper-in-oil caps (.033uF bridge \/ .015uF neck), the capacitor type Gibson used in its original late-1950s Les Paul wiring, paired here with Bourns Pro Audio potentiometers and the same 50s-wiring behavior players chase from this control layout - rolling back the volume knob keeps more high end intact instead of dulling your tone, and the tone control stays smooth and responsive across its full range. If you've been searching for a Les Paul 59 wiring harness or a prewired paper-in-oil harness for your Gibson or Epiphone Les Paul, this is the harness.\u003c\/p\u003e\n\u003ch2\u003eChoose Your Configuration\u003c\/h2\u003e\n\u003ch3\u003eHarness Only, or Harness with Prewired 3-Way Switch \u0026amp; Jack\u003c\/h3\u003e\n\u003cp\u003eBoth configurations use the same prewired 50s-wiring harness, Bourns pots, and Centralab paper-in-oil tone caps - the only difference is whether the pickup selector switch and output jack come already built in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHarness Only\u003c\/strong\u003e gives you four prewired potentiometers and paper-in-oil tone capacitors mounted on a drilled assembly board, ready to wire straight into your Les Paul's existing 3-way switch and output jack. Choose this if your current switch and jack are still working fine and you only need to replace the pots and capacitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHarness with Prewired 3-Way Switch \u0026amp; Jack\u003c\/strong\u003e adds a Switchcraft\/Centralab 3-way toggle switch, prewired with a black tip, in your choice of Chrome or Gold, plus a Switchcraft 1\/4-inch output jack - a complete drop-in harness with nothing left to source.\u003c\/p\u003e\n\u003ch2\u003eIs This the Right Harness for Your Les Paul?\u003c\/h2\u003e\n\u003cp\u003eThis harness fits the standard Les Paul control layout - two volume controls, two tone controls, and one pickup selector switch - used on Gibson and Epiphone Les Paul Standard, Traditional, Classic, Custom, and Studio models. A few Les Paul variants use a different control layout and need their own harness:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-pickup Les Paul:\u003c\/strong\u003e see our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/gibson-les-paul-3-pickup-wiring-kit-long-shaft-pots-pio-tone-cap-premium-59-series\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eLes Paul 3-Pickup wiring harness\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLes Paul Junior:\u003c\/strong\u003e see our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-junior-prewired-kit-2-controls-paper-in-oil-tone-cap-premium-59-series\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eLes Paul Junior prewired harness\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpiphone Les Paul Special:\u003c\/strong\u003e see our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-special-epiphone-prewired-kit-short-shaft-pots-pio-tone-capacitor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eEpiphone Les Paul Special prewired harness\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGibson Les Paul Special:\u003c\/strong\u003e see our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-special-gibson-dc-prewired-kit-short-shaft-pots-pio-tone-capacitor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGibson Les Paul Special prewired harness\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour 500K Bourns Pro Audio potentiometers, coarse-spline - your choice of short shaft or long shaft\u003c\/li\u003e\n\u003cli\u003eCentralab paper-in-oil tone capacitors (.033uF bridge \/ .015uF neck)\u003c\/li\u003e\n\u003cli\u003eVintage-style Gavitt cloth push-back wire\u003c\/li\u003e\n\u003cli\u003eFully prewired onto a drilled harness assembly board and tested before it ships\u003c\/li\u003e\n\u003cli\u003eWiring diagram and installation instructions included\u003c\/li\u003e\n\u003cli\u003eWith the Prewired 3-Way Switch \u0026amp; Jack configuration: a Switchcraft\/Centralab 3-way toggle switch prewired with a black tip (Chrome or Gold), plus a Switchcraft 1\/4-inch output jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications \u0026amp; Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-shaft\u003c\/strong\u003e potentiometers fit Gibson Les Paul Standard, Traditional, Classic, Custom, and Studio models manufactured in 1977 and later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-shaft\u003c\/strong\u003e potentiometers fit Gibson Les Paul Standard, Traditional, Classic, and Custom models manufactured before 1977 - some later reissue models also use a short shaft, so measure the threaded part of your current pot shaft if you're not sure which one you need - and ALL YEARS of Epiphone Les Paul models.\u003c\/li\u003e\n\u003cli\u003eEach pot mounts through a 3\/8-inch control-cavity hole (relevant for Epiphone Les Paul fitment).\u003c\/li\u003e\n\u003cli\u003eKnobs require an 18-tooth coarse-spline fit (replacement knobs sold separately).\u003c\/li\u003e\n\u003cli\u003eNot sure what your guitar needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShipping \u0026amp; Build Time\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom-built to order, with a 4–6 business day lead time before it ships\u003c\/li\u003e\n\u003cli\u003eIn-stock means we have the components on hand to build yours - not a pre-built unit sitting on a shelf\u003c\/li\u003e\n\u003cli\u003eFree shipping to U.S. addresses\u003c\/li\u003e\n\u003cli\u003e30-day return policy\u003c\/li\u003e\n\u003cli\u003eIf anything about your harness isn't right, we want to make it right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes this the \"59 Series\" harness?\u003c\/strong\u003e\u003cbr\u003eThe name comes from the tone capacitor. This harness uses Centralab paper-in-oil capacitors (.033uF bridge \/ .015uF neck) - the capacitor type used in Gibson's original late-1950s Les Paul wiring - paired with Bourns Pro Audio potentiometers and 50s-style wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is this different from your other Les Paul prewired wiring harness?\u003c\/strong\u003e\u003cbr\u003eBoth use the same 50s-wiring behavior and Bourns pots. This 59 Series harness uses Centralab paper-in-oil tone capacitors; our other Les Paul harness uses Orange Drop capacitors instead. Either one fits the same Les Paul control cavity - the choice comes down to which tone capacitor you'd rather have in your guitar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between short-shaft and long-shaft pots?\u003c\/strong\u003e\u003cbr\u003eShaft length is about knob height and fitment, not tone. Long-shaft pots fit Gibson Les Paul models from 1977 onward; short-shaft pots fit Gibson Les Pauls made before 1977 (and some later reissues) plus every Epiphone Les Paul. Measure the threaded part of your current pot shaft if you're not sure which one you have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this harness include the pickup selector switch?\u003c\/strong\u003e\u003cbr\u003eYour choice. Order the Harness Only configuration if you're keeping your existing 3-way switch and jack, or choose the Prewired 3-Way Switch \u0026amp; Jack configuration (Chrome or Gold) for a complete, ready-to-install harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tone caps does this harness use?\u003c\/strong\u003e\u003cbr\u003eCentralab paper-in-oil capacitors (.033uF bridge \/ .015uF neck) on 50s wiring, for the vintage-style roll-off players associate with the original late-50s Les Paul wiring. \u003cbr\u003e\u003cbr\u003eLooking here for the orange drop version of this same harness?\u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-50s-prewired-wiring-harness\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e Click here for the orange drop wiring harness\u003c\/a\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat knobs fit this harness?\u003c\/strong\u003e\u003cbr\u003ePots use an 18-tooth coarse-spline shaft, so you'll need coarse-spline knobs to match - we sell replacement knobs if you need them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my Epiphone Les Paul?\u003c\/strong\u003e\u003cbr\u003eYes - the short-shaft pot option fits all Epiphone Les Paul models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this harness fit my 3-pickup Les Paul?\u003c\/strong\u003e\u003cbr\u003eNo - a three-pickup Les Paul uses a different switching setup than this harness provides. See our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/gibson-les-paul-3-pickup-wiring-kit-long-shaft-pots-pio-tone-cap-premium-59-series\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eLes Paul 3-Pickup wiring harness\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit a Les Paul Junior?\u003c\/strong\u003e\u003cbr\u003eNo - the Les Paul Junior uses a simpler single-pickup, two-control layout. See our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-junior-prewired-kit-2-controls-paper-in-oil-tone-cap-premium-59-series\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eLes Paul Junior prewired harness\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit an Epiphone Les Paul Special?\u003c\/strong\u003e\u003cbr\u003eNo - the Epiphone Les Paul Special uses its own two-control layout, different from the standard four-control Les Paul. See our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-special-epiphone-prewired-kit-short-shaft-pots-pio-tone-capacitor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eEpiphone Les Paul Special prewired harness\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit a Gibson Les Paul Special?\u003c\/strong\u003e\u003cbr\u003eNo - the Gibson Les Paul Special also uses a two-control layout, different from the standard four-control Les Paul. See our \u003ca href=\"https:\/\/tonemanguitar.com\/products\/les-paul-special-gibson-dc-prewired-kit-short-shaft-pots-pio-tone-capacitor\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGibson Les Paul Special prewired harness\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it take to ship?\u003c\/strong\u003e\u003cbr\u003eEach harness is custom-built to order with a 4–6 business day lead time before it ships. Shipping to U.S. addresses is free, and every harness is backed by a 30-day return policy.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 20px; margin-bottom: 20px;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/gary.jpg?v=1784479278\" alt=\"Gary Standerfer - Tone Man Guitar\" style=\"width: 100px; height: 100px; border-radius: 50%; object-fit: cover; border: 2px solid #e8e8e8; flex-shrink: 0;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eCheers,\u003cbr\u003eGary Standerfer \/ Tone Man Guitar\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- START PAPER-IN-OIL NOTE BLOCK --\u003e\n\u003cdiv\u003e\n\u003ch3 style=\"margin: 0 0 8px 0; font-weight: bold;\"\u003eThe 59 Series Difference:\u003c\/h3\u003e\n\u003cp style=\"margin: 0;\"\u003ePaper-in-oil is the detail that separates the Premium 59 Series from a standard prewired Les Paul harness. Every 59 Series harness uses Centralab paper-in-oil tone capacitors - .033uF on the bridge tone control, .015uF on the neck - the capacitor type Gibson built into its original late-1950s Les Paul wiring, before film capacitors like Orange Drop became the modern standard replacement. Paired with Bourns Pro Audio potentiometers and 50s-style wiring, it's built for players who want their Gibson or Epiphone Les Paul's two-volume, two-tone control set as close as possible to that original 59-spec feel, in either short-shaft or long-shaft form, with or without the prewired switch and jack. Not sure which shaft length or configuration your Les Paul needs? Reach out through our \u003ca href=\"https:\/\/tonemanguitar.com\/pages\/contact\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e page before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- END PAPER-IN-OIL NOTE BLOCK --\u003e","brand":"Tone Man Guitar","offers":[{"title":"Short-Shaft Pots without Switch or Jack","offer_id":47052033851590,"sku":null,"price":91.99,"currency_code":"USD","in_stock":true},{"title":"Short-Shaft Pots with Chrome Switch \u0026 Jack","offer_id":47138377466054,"sku":null,"price":130.99,"currency_code":"USD","in_stock":true},{"title":"Short-Shaft Pots with Gold Switch \u0026 Jack","offer_id":47138377498822,"sku":null,"price":145.99,"currency_code":"USD","in_stock":true},{"title":"Long-Shaft Pots without Switch or Jack","offer_id":47138377531590,"sku":null,"price":91.99,"currency_code":"USD","in_stock":true},{"title":"Long-Shaft Pots with Chrome Switch \u0026 Jack","offer_id":47138377564358,"sku":null,"price":130.99,"currency_code":"USD","in_stock":true},{"title":"Long-Shaft Pots with Gold Switch \u0026 Jack","offer_id":47138377597126,"sku":null,"price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/3583\/8918\/files\/les_paul_59_short_shaft_final.jpg?v=1792327510"}],"url":"https:\/\/tonemanguitar.com\/collections\/best-sellers.oembed","provider":"Tone Man Guitar","version":"1.0","type":"link"}